HOVERINK BIOTECHNOLOGIES APPOINTS VSTOCK TRANSFER, LLC AS ITS TRANSFER AGENT AND REGISTRAR
LOS ANGELES, CA, July 11, 2018 (GLOBE NEWSWIRE) -- HOVERINK BIOTECHNOLOGIES Appoints VSTOCK TRANSFER, LLC as its TRANSFER AGENT AND REGISTRAR
Hoverink Biotechnologies is currently developing IV and oral formulations of LADAVRU® to treat chronic pain, nausea and discomfort associated with chemotherapy and neuropathy. Hoverink Biotechnologies is currently responsible for the worldwide clinical development of LADAVRU and is responsible for any regulatory filings in additional territories. LADAVRU ® SERIAL NUMBER '87601498' covering pharmaceutical preparations for the treatment of gastrointestinal and oncological diseases and disorders. Once regulatory approval for LADAVRU is achieved Hoverink Biotechnologies sales force will market the products. Hoverink Biotechnologies is currently developing IV and oral formulations of LADAVRU® to treat chronic pain, nausea and discomfort associated with chemotherapy and neuropathy.
An oral version of LADAVRU® is currently in pre-clinical development.
LADAVRU® created for the treatment of gastrointestinal and oncological diseases and disorders. is a proprietary opioid alternative which is deliverable as an IV injectable, OR solid preparation containing; Citric Acid, Mannitol and Dronabinol, a cannabinoid designated chemically as (6aR-trans)-6a,7,8,10a-tetrahydro-6,6,9- trimethyl-3-pentyl-6Hdibenzo[b,d]pyran-1-ol.
LADAVRU® focuses on chronic pain, nausea and discomfort associated with chemotherapy, particularly, cancer survivors; LADAVRU® may also treat pain for sufferers of a range of cancers, including leukemias, lymphomas, and breast, stomach, uterine, ovarian, bladder, and lung cancers.
Government authorities in the U.S., at the federal, state and local level, and other countries extensively regulate, among other things, the research, development, testing, manufacture, quality control, approval, labeling, packaging, storage, record-keeping, promotion, advertising, distribution, post-approval monitoring and reporting, marketing and export and import of products such as those we are developing. The pharmaceutical drug product candidates that we develop must be approved by the FDA before they may be legally marketed. In the United States, the FDA regulates pharmaceutical products under the Federal Food, Drug and Cosmetic Act, and implementing regulations.
Pharmaceutical products are also subject to other federal, state and local statutes and regulations. The process of obtaining regulatory approvals and the subsequent compliance with appropriate federal, state, local and foreign statutes and regulations require the expenditure of substantial time and financial resources. Failure to comply with the applicable U.S. requirements at any time during the product development process, approval process or after approval, may subject an applicant to administrative or judicial sanctions. FDA sanctions could include refusal to approve pending applications, withdrawal of an approval, a clinical hold, warning letters, product recalls, product seizures, total or partial suspension of production or distribution injunctions, fines, refusals of government contracts, restitution, disgorgement or civil or criminal penalties. Any agency or judicial enforcement action could have a material adverse effect on us. The process required by the FDA before a non-biological pharmaceutical product may be marketed in the U.S. generally involves the following:
• Completion of preclinical laboratory tests, animal studies and formulation studies according to Good Laboratory Practices or other applicable regulations;
• Submission to the FDA of an Investigational New Drug, or IND, which must become effective before human clinical studies may begin;
• Performance of adequate and well-controlled human clinical studies according to the FDA’s current good clinical practices (“GCP”), to establish the safety and efficacy of the proposed pharmaceutical product for its intended use;
• Submission to the FDA of an NDA for a new pharmaceutical product;
• Satisfactory completion of an FDA inspection of the manufacturing facility or facilities where the pharmaceutical product is produced to assess compliance with the cGMP, to assure that the facilities, methods and controls are adequate to preserve the pharmaceutical product ’s identity, strength, quality and purity;
• Potential FDA audit of the preclinical and clinical study sites that generated the data in support of the NDA; and
• FDA review and approval of the NDA.
The lengthy process of seeking required approvals and the continuing need for compliance with applicable statutes and regulations require the expenditure of substantial resources and approvals are inherently uncertain.
Before testing any compounds with potential therapeutic value in humans, the pharmaceutical product candidate enters the preclinical testing stage.
Preclinical tests include laboratory evaluations of product chemistry, toxicity and formulation, as well as animal studies to assess the potential safety and activity of the pharmaceutical product candidate. These early proof-of-principle studies are done using sound scientific procedures and thorough documentation. The conduct of the single and repeat dose toxicology and toxicokinetic studies in animals must comply with federal regulations and requirements including good laboratory practices. The sponsor must submit the results of the preclinical tests, together with manufacturing information, analytical data, any available clinical data or literature and a proposed clinical protocol, to the FDA as part of the IND. The IND automatically becomes effective 30 days after receipt by the FDA, unless the FDA has concerns and notifies the sponsor. In such a case, the IND sponsor and the FDA must resolve any outstanding concerns before the clinical study can begin. If resolution cannot be reached within the 30-day review period, either the FDA places the IND on clinical hold or the sponsor withdraws the application. The FDA may also impose clinical holds on a pharmaceutical product candidate at any time before or during clinical studies due to safety concerns or non- compliance. Accordingly, we cannot be sure that submission of an IND will result in the FDA allowing clinical studies to begin, or that, once begun, issues will not arise that suspend or terminate such clinical study.
Clinical studies involve the administration of the pharmaceutical product candidate to healthy volunteers or patients under the supervision of qualified investigators, generally physicians not employed by or under the clinical study sponsor ’s control. Clinical studies are conducted under protocols detailing, among other things, the objectives of the clinical study, dosing procedures, subject selection and exclusion criteria, how the results will be analyzed and presented and the parameters to be used to monitor subject safety. Each protocol must be submitted to the FDA as part of the IND. Clinical studies must be conducted in accordance with GCP. Further, each clinical study must be reviewed and approved by an independent institutional review board (“IRB”) at, or servicing, each institution at which the clinical study will be conducted. An IRB is charged with protecting the welfare and rights of study participants and considers such items as whether the risks to individuals participating in the clinical studies are minimized and are reasonable in relation to anticipated benefits. The IRB also approves the informed consent form that must be provided to each clinical study subject or his or her legal representative and must monitor the clinical study until completed.
Human clinical studies are typically conducted in three sequential phases that may overlap or be combined:
• Phase 1: The pharmaceutical product is initially introduced into healthy human subjects and tested for safety, dosage tolerance, absorption, metabolism, distribution and excretion. In the case of some products for severe or life-threatening diseases such as cancer, especially when the product may be too inherently toxic to ethically administer to healthy volunteers, the initial human testing is often conducted in patients, with a goal of characterizing the safety profile of the drug and establishing a maximum tolerable dose (“MTD”). Our pharmaceutical products fall into this latter category because its products are intended to treat cancer and contain cytotoxic agents. Hence, our Phase 1 studies are conducted in late-stage cancer patients whose disease has progressed after treatment with other agents.
• Phase 2: With the maximum tolerable dose established in a Phase 1 trial, the pharmaceutical product is evaluated in a limited patient population at the MTD to identify possible adverse effects and safety risks, to preliminarily evaluate the efficacy of the product for specific targeted diseases, to determine dosage tolerance, optimal dosage and dosing schedule and to identify patient populations with specific characteristics where the pharmaceutical product may be more effective.
• Phase 3: Clinical studies are undertaken to further evaluate dosage, clinical efficacy and safety in an expanded patient population at geographically dispersed clinical study sites. These clinical studies are intended to establish the overall risk/benefit ratio of the product and provide an adequate basis for product labeling. The studies must be well controlled and usually include a control arm for comparison. One or two Phase 3 studies are usually required by the FDA for an NDA approval, depending on the disease severity and other available treatment options. In some instances, where a Special Protocol Assessment is granted by the FDA, an NDA approval may be obtained based on Phase 2 clinical data with the understanding that the approved drug can be sold subject to a confirmatory Phase 3 trial to be conducted post-approval.
Post-approval studies, or Phase 4 clinical studies, may be conducted after initial marketing approval. These studies are used to gain additional experience from the treatment of patients in the intended therapeutic indication. The FDA also may require post-marketing testing, known as Phase 4 testing, risk minimization action plans and surveillance to monitor the effects of an approved product or place conditions on an approval that could restrict the distribution or use of the product.
Progress reports detailing the results of the clinical studies must be submitted at least annually to the FDA and written IND safety reports must be submitted to the FDA and the investigators for serious and unexpected adverse events or any finding from tests in laboratory animals that suggests a significant risk for human subjects. Phase 1, Phase 2 and Phase 3 clinical studies may not be completed successfully within any specified period, if at all. The FDA or the sponsor or its data safety monitoring board may suspend a clinical study at any time on various grounds, including a finding that the research subjects or patients are being exposed to an unacceptable health risk. Similarly, an IRB can suspend or terminate approval of a clinical study at its institution if the clinical study is not being conducted in accordance with the IRB’s requirements or if the pharmaceutical product has been associated with unexpected serious harm to patients.
Concurrent with clinical studies, companies usually complete additional animal studies and must also develop additional information about the chemistry and physical characteristics of the pharmaceutical product as well as finalize a process for manufacturing the product in commercial quantities in accordance with cGMP requirements. The manufacturing process must be capable of consistently producing quality batches of the pharmaceutical product candidate and, among other things, must develop methods for testing the identity, strength, quality and purity of the final pharmaceutical product. Additionally, appropriate packaging must be selected and tested and stability studies must be conducted to demonstrate that the pharmaceutical product candidate does not undergo unacceptable deterioration over its shelf life.
The results of product development, preclinical studies and clinical studies, along with descriptions of the manufacturing process, analytical tests conducted on the chemistry of the pharmaceutical product, proposed labeling and other relevant information are submitted to the FDA as part of an NDA requesting approval to market the product. The submission of an NDA is subject to the payment of substantial user fees. A waiver of such fees may be obtained under certain limited circumstances.
The FDA reviews all NDAs submitted before it accepts them for filing and may request additional information rather than accepting an NDA for filing. Once the submission is accepted for filing, the FDA begins an in-depth review of the NDA. Under the goals and policies agreed to by the FDA under the Prescription Drug User Fee Act (“PDUFA”), the FDA has 10 months after the 60-day filing date in which to complete its initial review of a standard NDA and respond to the applicant, and six months after the 60-day filing date for a priority NDA. The FDA does not always meet its PDUFA goal dates for standard and priority NDAs.
After the NDA submission is accepted for filing, the FDA reviews the NDA application to determine, among other things, whether the proposed product is safe and effective for its intended use, and whether the product is being manufactured in accordance with cGMP to assure and preserve the product’s identity, strength, quality and purity. The FDA may refer applications for novel pharmaceutical products or pharmaceutical products which present difficult questions of safety or efficacy to an advisory committee, typically a panel that includes clinicians and other experts, for review, evaluation and a recommendation as to whether the application should be approved and under what conditions. The FDA is not bound by the recommendations of an advisory committee, but it considers such recommendations carefully when making decisions. During the pharmaceutical product approval process, the FDA also will determine whether a risk evaluation and mitigation strategy (“REMS”) is necessary to assure the safe use of the pharmaceutical product. If the FDA concludes that a REMS is needed, the sponsor of the NDA must submit a proposed REMS; the FDA will not approve the NDA without a REMS, if required.
Before approving an NDA, the FDA will inspect the facilities at which the product is manufactured. The FDA will not approve the product unless it determines that the manufacturing processes and facilities are in compliance with cGMP requirements and adequate to assure consistent production of the product within required specifications. Additionally, before approving an NDA, the FDA will typically inspect one or more clinical sites as well as the site where the pharmaceutical product is manufactured to assure compliance with GCP and cGMP. If the FDA determines the application, manufacturing process or manufacturing facilities are not acceptable, it will outline the deficiencies in the submission and often will request additional testing or information. In addition, the FDA will require the review and approval of product labeling.
The NDA review and approval process is lengthy and difficult and the FDA may refuse to approve an NDA if the applicable regulatory criteria are not satisfied or may require additional clinical data or other data and information. Even if such data and information is submitted, the FDA may ultimately decide that the NDA does not satisfy the criteria for approval. Data obtained from clinical studies are not always conclusive and the FDA may interpret data differently than we interpret the same data. The FDA will issue a complete response letter if the agency decides not to approve the NDA. The complete response letter usually describes all of the specific deficiencies in the NDA identified by the FDA. The deficiencies identified may be minor, for example, requiring labeling changes, or major, for example, requiring additional clinical studies. Additionally, the complete response letter may include recommended actions that the applicant might take to place the application in a condition for approval. If a complete response letter is issued, the applicant may either resubmit the NDA, addressing all of the deficiencies identified in the letter, or withdraw the application.
LADAVRU® was created for the treatment of gastrointestinal and oncological diseases and disorders. LADAVRU® is a proprietary opioid alternative which is deliverable as an IV injectable, OR solid preparation containing; Citric Acid, Mannitol and Dronabinol, a cannabinoid designated chemically as (6aR-trans)-6a,7,8,10a-tetrahydro-6,6,9- trimethyl-3-pentyl-6Hdibenzo[b,d]pyran-1-ol
LADAVRU® focuses on chronic pain, nausea and discomfort associated with chemotherapy, particularly, cancer survivors; LADAVRU® may also treat pain for sufferers of a range of cancers, including leukemias, lymphomas, and breast, stomach, uterine, ovarian, bladder, and lung cancers. The most recently published prevalence statistics from the National Cancer Institute reported that the number of people living beyond a cancer diagnosis reached nearly 14.5 million in 2014 and is expected to rise to almost 19 million by 2024. As more cancer survivors increase the Non-Opioid Pain Tolerance Solutions need also increases. Our anticipated time from for beginning and completing each of our milestones are listed as the following;
Our LADAVRU® milestones occur when we: (1) When our LADAVRU® qualifies for Orphan Drug status, which could entitle us to market exclusivity of up to 7 and 10 years from the date of approval of a New Drug Application (NDA) and Marketing Authorization (MA), in the US and the European Union (EU), respectively.
Hoverink Biotechnologies, Inc, headquartered in Los Angeles, CA, is an independent biopharmaceutical company that discovers, develops, manufactures and commercializes or out-licenses proprietary therapeutics for the treatment of critically ill sufferers of cancers and chronic pain, nausea and discomfort associated with chemotherapy many of which have severe or even fatal consequences for patients, and collectively represent a significant unmet medical need.
Here is a Video Link for LADAVRU https://www.youtube.com/watch?v=jW7Ck-m_P6g
This press release shall not constitute an offer to sell or the solicitation of an offer to buy shares. Hoverink Biotechnologies, Inc., headquartered in Los Angeles, CA, is an independent biotech company. In addition to historical information, this press release contains forward-looking statements that involve risks and uncertainties, including but not limited to, uncertainties related to the offering of the shares. Actual results could differ materially. for more information on Hoverink Biotechnologies, Inc. please visit the company’s web site at http://www.hoverinkbiotech.yolasite.com/ or call the Hoverink Biotechnologies at 866-443-4666 EXT 113
Contact: Hoverink Biotechnologies, Inc. 1801 Century Park East., 24th Floor Los Angeles, California 90067
866-443-4666 EXT 113