Use Notebook Studies to Ensure Successful Reusable Device Cleaning Validations, Recommends MicroTest Laboratories
Published: Aug 15, 2012
AGAWAM, Mass., Aug. 14, 2012 /PRNewswire/ -- A new management brief from Microtest Laboratories recommends that medical device manufacturers use notebook studies to help ensure successful reusable device cleaning validations. The lab bases the advice on its performance of validations for various types of medical instruments over the years.
The brief discusses the document, "FDA Draft Guidance for Industry and Staff, Processing /Reprocessing Medical Devices in Health Care Settings: Validation Methods and Labeling," which was released in May 2011.
"Even though it's labeled as a draft, experience has shown that most reusable device cleaning validations are being evaluated based on this document," said Patrick Kenny, manager of analytical services at Microtest Laboratories and author of the new brief titled, "Notebook Studies to Ensure Successful Reusable Device Cleaning Validations."
Kenny's brief focuses on areas of the FDA guidance document that are causing difficulties in cleaning validations, and demonstrates how pre-validation laboratory work can help save time and money. It also identifies areas that can cause issues during validations if they are not thoroughly addressed prior to initiating the protocol. These include:
- The use of worst-case conditions
- The switch from microbial-based assays to chemical-based assays
- The determination of an acceptable residual level
- The validation of a reusable device's cleaning instructions
"The good news is that almost all of these issues can be eliminated with some up-front work," Kenny said. "And this preparatory work can best be performed by notebook studies prior to initiating GLP studies. The information obtained in these relatively quick studies often saves significant time later in the filing process."
"In short, we recommend the use of notebook studies prior to beginning the validation to eliminate as many unknowns as possible," he said.
To obtain a copy of the new management brief, "Notebook Studies to Ensure Successful Reusable Device Cleaning Validations," visit http://www.microtestlabs.com/notebook-studies-brief or call 1-413-786-1680, or toll-free 1-800-631-1680.
About Microtest Laboratories
Microtest Laboratories is a full-service medical device testing laboratory and provider of related services for the medical device, pharmaceutical, and biotechnology industries. Medical device testing is performed in-house by seasoned regulatory microbiologists and chemists under strict GMP/GLP regulations. Microtest is both ISO 9000 and 17025 certified. Testing services include bioburden, sterility, endotoxin, accelerated aging, and toxicity (ISO 10993). In addition, Microtest recently introduced a fast-track test to screen plastics and polymers in medical devices for toxicity using Zebrafish embryos.
Based in Agawam, Massachusetts, USA, the company provides expertise and flexible processes that enhance product safety and security, accelerate time to market, and minimize supply chain disruption. For more information, visit http://www.microtestlabs.com, or call 1-413-786-1680 or toll-free 1-800-631-1680. Follow on Twitter at http://twitter.com/MicrotestLabs.
Available Topic Expert(s): For information on the listed expert(s), click appropriate link.
Steve Richter, Ph.D.
SOURCE Microtest Laboratories