News | News By Subject | News by Disease News By Date | Search News
Get Our FREE
Industry eNewsletter
email:    
   

Morgan Technical Ceramics Showcased Innovative Medical Ceramic Materials, Components and Assemblies at MD&M East 2012


6/8/2012 2:43:21 PM

June 08, 2012 -- Morgan Technical Ceramics recently showcased a wide range of ceramic materials, components and assemblies, at the Medical Design & Manufacturing East (MD&M East) Conference and Exposition 2012, which took place May 22-May 24, 2012, in Philadelphia, PA, Booth #577.

The extensive range of products for medical devices displayed at MD&M East demonstrates MTC’s superior capabilities in the medical market. These include custom ceramic sensors and transducers where MTC offers more than 30 formulations of piezoelectric materials that can be manufactured into standard and custom sizes and shapes, HIP Vitox® ceramic femoral heads, which are mechanically and chemically stable and bio-inert and advanced ceramic components for therapeutic equipment.

Therapeutic equipment components showcased included metalized ceramic RF windows, medical linear accelerator (LINAC) metallized rings as well as feedthroughs and high power insulators for cyclotrons. Typically used within tubes or rings inside medical accelerators as acceleration units, or within proton therapy equipment as high voltage, high power insulators, the ceramic components provide low dielectric loss at high frequency and high mechanical strength. They also feature vacuum integrity, good thermal conductivity, and high electrical volume and surface resistance.

Also exhibited at MD&M was PZT (lead zirconate titanate) high dielectric materials, 1-3 and 2-2 composites, and in-line sensors used in medical ultrasound devices, including those used for air-in-line, occlusion and flow sensing. MTC’s piezo ceramic air-in-line sensors include a standard bubble detector for a 4-5 millimeter (mm) tube, designed to minimize their footprint, with a short flexi circuit for easy connection. Contact pressure sensors based on piezo resistivity are designed to detect blockages in infusion lines, detecting both negative and positive pressure changes. They are ideal for use in such equipment as infusion pumps, enteral feeding pumps, dialysis equipment and other fluid applications.

Ultrasonic sensors include those used for in-line flow measurement, which combine precision machined mechanical parts with advanced piezoelectric components to provide accurate flow measurement of de-aerated liquids, such as blood, saline and water in medical grade tubing.

Application discussed MTC’s capabilities for customizing sensor designs to suit specific OEM needs, including housing geometry, color, and adaptation to specific tubing and environmental conditions, mounting arrangement, or interface with a disposable cassette.

HIP Vitox® ceramic-on-ceramic hip joints, manufactured from a high quality alumina material, can withstand high shock without fracture. The high material hardness and scratch resistance mean that the ceramic femoral heads reduce the amount of polyethylene cup wear compared to that of metal heads. The company’s HIP Vitox® ceramic-on-ceramic hip joints have demonstrated an exceptionally low wear rate of just 0.032mm3/million cycles. They are available in sizes from 28mm to 60mm; the larger head sizes provide increased range of motion and have an even lower wear rate as load is spread over a larger surface area.

MTC’s piezoelectric ceramic manufacturing facilities are ISO 9001 and 14001 registered and several sites are certified under the ISO13458 standard for designing and manufacturing medical devices.

For further information, please contact:

Kristin Nugent, 617-367-0100 x148

Kristin.nugent@mgr1.com

Scott Bentley, +44 (0) 1299 872217

Scott.Bentley@morganplc.com

About Morgan Technical Ceramics

Morgan Technical Ceramics manufactures components and sub-assemblies using an extensive range of materials, including structural and piezoelectric ceramics, dielectrics, braze alloys, and specialist coatings. It works with manufacturers’ design and R&D teams at local, national and international level on projects from concept and feasibility studies through prototype development to full production. The business employs some 2,500 people and has 23 manufacturing sites worldwide across Europe, the US, Mexico, China and Australia.

Morgan Technical Ceramics is a business within the Morgan Ceramics Division of The Morgan Crucible Company plc, one of the world's leading advanced materials companies. The company specialises in the design, manufacture and marketing of ceramic and carbon products which are used in a wide range of applications, from transport and telecommunications to fire protection and medical instruments. Morgan Crucible is listed on the London Stock Exchange in the engineering sector.

For more information on Morgan Technical Ceramics visit www.morgantechnicalceramics.com or contact one of our sales offices below:

Europe

Morgan Technical Ceramics, Bewdley Road, Stourport, Worcestershire, DY13 8QR.

Tel +44 (0)1299 872210 Fax +44 (0)1299 872218

Email mtcuksales@morganplc.com

North America

Morgan Technical Ceramics, 26 Madison Road, Fairfield, NJ 07004, USA

Tel +1 800 433 0638 Fax: +1 973 227 7135

Email mtcussales@morganplc.com

Asia

Morgan Ceramics

150 Kampong Ampat, #05-06A KA Centre, Singapore 368324

Tel +65 6595 0000 Fax +65 6595 0005

Email asia.mc@morganplc.com


Read at BioSpace.com

comments powered by Disqus
 
 

ADD TO DEL.ICIO.US    ADD TO DIGG    ADD TO FURL    ADD TO STUMBLEUPON    ADD TO TECHNORATI FAVORITES